Kramer TP-582R 1x2 HDMI Switchable Receiver with Ethernet, RS–232 & IR over Extended–Reach HDBaseT

The TP−582R is a high−quality twisted pair receiver for HDMI, Ethernet 100BaseT, bidirectional RS−232 and IR signals. The TP−582T selects one of two HDMI inputs, and converts it with the Ethernet 100BaseT, RS−232 and IR input signals to an HDBaseT twisted pair signal. The TP−582R converts the HDBaseT twisted pair signal back to Ethernet 100BaseT, RS−232, IR and two HDMI outputs, and de−embeds the audio to S/PDIF and TOSLINK® audio outputs.

• Max. Data Rate — 6.75Gbps (2.25Gbps per graphic channel).
• HDBaseT Technology.
• HDTV Compatible.
• HDCP Compliance.
• HDMI Support — Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS–HD, CEC.
• 3D Pass–Through.
• EDID PassThru — Passes EDID signals between the source and display.
• Bidirectional RS–232 Interface — Commands and data can flow in both directions via the RS–232 interface, allowing status requests and control of the destination unit.
• Ethernet Interface — Passes 100BaseT.
• System Range — Signals of up to 6.75Gbps (up to 1080p@60Hz 36–bit) over a range of up to 130m (430ft) when using BC–UNIKat cables.
• Cable — For optimum range and performance using HDBaseT™, use Kramer's BC–UNIKat cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using non–Kramer CAT 6 cable may not reach these ranges.
• Control — Front panel.
• Indicators — Status LEDs for input selection, output, link and power.
• Compact MegaTOOLS® — 2 units can be rack mounted side–by–side in a 1U rack space with the optional RK–T2B universal rack adapter.