Kramer TP-780TXR 4K60 4:2:0 HDMI HDCP 2.2 PoE Transmitter with Ethernet, RS–232 & IR over Extended–Reach HDBaseT
- HDBaseT transmitter
- Extended–reach — Up to 180m
- Bandwidth — Up to 10.2Gbps
- Video resolution — Up to 4K@60Hz (4:2:0) 24bpp
- Compliance — HDMI 2.0, HDCP 2.2
- EDID and CEC pass–through
TP−780TXR is a high−performance, HDBaseT twisted pair transmitter for 4K@60Hz (4:2:0), 2Kx4K HDMI, Ethernet, bidirectional RS−232, IR signals and PoE. The TP−780TXR inputs HDMI, Ethernet, RS−232, and IR signals and converts them into an HDBaseT twisted pair signal that it transmits to a TP−780RXR receiver. The TP−780TXR provides power remotely over Ethernet to the TP−780RXR in places where an external power supply is difficult to reach. The result is that a single HDBaseT LAN cable can provide both data and power to compatible devices.
- Reach Extension — Up to 100m (330ft) at 4K @60Hz (4:2:0); up to 130m (430ft) at full HD (1080p @60Hz 36bpp); up to 180m (590ft) at HDBaseT ultra mode and full HD (1080p @60Hz 24bpp), when using Kramer HDBaseT cables.
- Transmitted Data Bandwidth — Up to 10.2Gbps (3.4Gbps per graphic channel).
- Transmitter Compliance — Complies with HDBaseT receiver.
- Video Resolution — Up to 4K@60Hz (4:2:0) 24bpp.
- HDMI Signal Transmission — HDMI 2.0 and HDCP 2.2 compliant signal, supporting deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS–HD, CEC, Full HD, 2K, 4K, and 3D.
- Multi–channel Audio Transmission — Up to 32 channels of digital stereo uncompressed signals for supporting surround sound at studio level.
- EDID and CEC Pass Through — Passes EDID and CEC signals from the source to the display.
- Ethernet Transmission — Ethernet interface data flows in both directions to allow extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
- Bidirectional RS–232 Transmission — Serial interface data flows in both directions to allow data transmission and device control.
- Bidirectional Infrared Transmission — IR interface data flows in both directions to allow remote control of peripheral devices located at either end of the extended line.
- Firmware Upgrade — Local upgrade via RS–232 control connection and the K–Upload tool to ensure field–proven deployment.
- LED Indicators — Status indicators for HDMI input and the HDBT output link facilitate maintenance and troubleshooting.
- Easy Installation — Single cable for transmitting HDBaseT signals and PoE to the receiver. Compact Mega TOOLS™ fan–less enclosure for over–ceiling mounting, or side–by–side mounting of 2 units in a 1U rack space with the optional RK–T2B rack adapter.