Altinex UT260-104 Under Table HDMI to HDBaseT Receiver

Our Part Number: UT260-104
  • Receive Audio/Video/Control up to 70m over one Cat 6/Cat 6A/Cat 7 cable
  • Support VGA with WUXGA resolution, HDMI 4k x 2K, DP 1.2 with 4K@30Hz
  • HDCP 1.4 compliant
  • IR and RS-232 pass through
  • Remote power from HDBT transmitter
  • Status LED on front

More details

New product

$240.00

- +

 
More info

The Altinex UT260-104 HDBT Receiver is a high performance HDBT receiver with HDMI output. In addition to video, the UT260-104 also allows both IR and RS-232 control signals from the transmitter to the receiver, or from the receiver to the transmitter. The RS-232 port is independently configurable allowing different baud rates than the transmitter.

The TX+RX system supports manual or auto-switching modes, pass-through IR or RS-232 controls, and custom audio selection. Auto-switching automatically switches to the newest input. Manual control allows the switch to be controlled from user interface momentary switches, RS-232 protocols, or via the built-in web server. A special feature gives the user the ability to select between using the embedded audio (HDMI/DP) or the external audio from the 3.5mm audio input port. The external audio is automatically selected with the VGA input, but can also be used to override the HDMI or DP embedded audio.

A power supply is included with the UT260-104, or the UT260-104 receiver can be powered by the UT260-103 transmitter when used with a direct connection between the transmitter and receiver.

No products

To be determined Shipping
$0.00 Total

Check out