VM-3000 Series VM-3240E QAM VM Extension Amplifier 240W

Our Part Number: VM-3240E QAM
  • 240 Watt
  • Extension Amplifier
  • EIA-Standard equipment rack (3-unit size)

More details

New product

Unavailable

 
More info

The VM-3240E is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures. Specification Power Source 230 V AC, 50/60 Hz Power Consumption 600 W (with rated output signal), 260 W (according to EN60065) Rated Output 240 W Frequency Response 50 Hz - 20 kHz, ±3 dB (at 1/3 rated output) Distortion 0.7 % or less (at rated output, 1 kHz) S/N Ratio 85 dB or more Input External amplifier input: 100 V line, removable terminal block (14 pins) Output Speaker output 1 - 2: Max. (240 W) per output Speaker output 3 - 6: Max. (120 W) per output Speaker output 1 - 6: Total within 240 W, removable terminal block (14 pins) Allowable minimum load: 500  (20 W) at 100 V line for speaker line failure detection Direct output: Direct output from internal or external amplifier, removable terminal block (16 pins) VM Link Input: Connecting the VM-3240VA or VM-3360VA, RJ45 female connector Output: Connecting the VM-3240E or VM-3360E, RJ45 female connector Maximum distance: 800 m (874.89 yd) Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) EXT PA Link Connecting the VP-2241, RJ45 female connector Maximum distance: 5 m (16.4 ft) Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) General Control Input 1 - 8: No-Voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA or less, removable terminal block (14 pins) Output 1 - 8: Isolated open collector output, withstand voltage: 30 V DC, operating current: 10 mA or less, removable terminal block (14 pins) Emergency Control Input 1 - 5: No-Voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA or less, RJ45 female connector Input 6: Isolated voltage input, Inactive: -24 V ±20 %, Active: +24 V ±20 %, RJ45 female connector Status out: Relay contact output, withstand voltage: 40 V DC, operating current: 2 - 300 mA, RJ45 female connector ATT Control Relay contact 1-6, 125 V AC or 30 V DC, total under 5 A, removable terminal block (16 pins) Power Input/Output Power in: Connecting the VX-2000DS only (operating range: 20 - 40 V DC) PS out: 28 V DC/18 A M4 screw terminal, distance between barriers: 11 mm (0.43") DC24V Output 24 V DC, Maximum feeding current 0.3 A Ds Link Connecting the VX-2000DS, RJ45 female connector Maximum distance: 5 m (16.4 ft) Link cable: Category 5 Shielded Twisted-Pair straight cable (CAT5-STP) Operating Temperature -5  to +45  (23 F to 113 F) Operating Humidity 5 % to 95 %RH (no condensation) Finish Panel: Aluminum, hairline, black Case: Surface-treated steel plate, black, paint Dimensions 482 (W) × 132.6 (H) × 407 (D) mm (18.98" × 5.22" × 16.02") Weight 16.5 kg (36.38 lb) Accessory Power cable (2 m (6.56 ft)) …1, Link cable (3 m (9.84 ft)) …2, Plastic foot …4, Plastic foot mounting screw …4, Removable terminal plug (14 pins) …3, Removable terminal plug (16 pins) …1

No products

To be determined Shipping
$0.00 Total

Check out