The A-9120DHM2 CU Amplifier is designed to be used in conjunction with optional modules and can be confiugured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The most appropriate modules can be selected depending on applications. Since it comes with two 120W power amplifiers, it can individually perform multi-origin braodcasts. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.
24-bit, 48 kHz sampling
Ultra-Low Distortion - 0.0008%
Minimum Latency - 1.1ms (D-001T input to output)
10-Band Parametric EQ
High and Low Pass Filters
Bass and Treble
Delay (MIXER mode)
34 TOA Speaker EQ Presets
Mixer functions along with simultaneous Priority Paging Matrix activation, each with 32 presets
Scene memory (x32) contains all mixer (non-priority) settings
Paging memory (x32) contains global (static) input settings, independent Xpoint assignments, paging trigger & paging output levels for all high priority (1, 2 & 3) inputs.
Both scene & paging memories are stored in a single template along with remote assignments, security lock and other global functions
Mixer & Paging functions are independent and mixer (scene) settings will not affect Paging (event) functions.