 |
 |
|
| BusinessChurchConsumerSchoolGovernmentContractorPackagesInstallation |
|
Home
Packages
Screens
Projectors
Microphones
Assistive Listening
Audio
Amplifiers
Switchers/Interfaces
Home
Packages
Screens
Projectors
Flat Panel Displays
Cameras
Speakers
Amplifiers
Switchers/Interfaces
Home
Packages
Screens
Projectors
Electronic Whiteboards
Document Cameras
Carts
Audio
Switchers/Interfaces
Home
Packages
Screens
Projectors
Audio
Switchers/Interfaces
Distribution Amplifiers
CCTV/Security
Carts
Interested in getting better pricing? [Tell me more]
Need assistance with A/V equipment installation? [Tell me more]
|
 | |
 | |
 | |
 |
Proud Member of:
Radio Design Labs STM-3 Microphone Preamplifier
|
|
Product Description
The STM-3 is a quality low-noise microphone preamplifier designed for use in surveillance, commercial sound, broadcast, and recording where higher than normal gain is required. The STM-3 is very flexible, with gain adjustment from 45 to 75 dB, two balanced or unbalanced outputs, and available phantom supply input. Its low-distortion and low-noise performance make it the best choice, even when larger preamps could be used. The single-ended supply input range is from 24 to 33 Vdc. Operation from 12 Vdc is possible with a 6 dB reduction in headroom. Each output drives high or low impedance loads.
The STM-3 is a quality low-noise microphone preamplifier designed for use in surveillance, commercial sound, broadcast, and recording where higher than normal gain is required. The STM-3 is very flexible, with gain adjustment from 45 to 75 dB, two balanced or unbalanced outputs, and available phantom supply input. Its low-distortion and low-noise performance make it the best choice, even when larger preamps could be used. The single-ended supply input range is from 24 to 33 Vdc. Operation from 12 Vdc is possible with a 6 dB reduction in headroom. Each output drives high or low impedance loads.
|
Have A Question? Expert advice is only a phone call or email away. Call 1-866-866-6767 or use our online form to request more information from our knowledgeable staff on the Radio Design Labs STM-3 Microphone Preamplifier. Request Info |
|