 |
|
Site Map Login to my account View my shopping cart  |
| BusinessChurchConsumerSchoolGovernmentContractorPackagesInstallation |
|
Home
Packages
Screens
Projectors
Microphones
Assistive Listening
Audio
Amplifiers
Switchers/Interfaces
Home
Packages
Screens
Projectors
Flat Panel Displays
Cameras
Speakers
Amplifiers
Switchers/Interfaces
Home
Packages
Screens
Projectors
Electronic Whiteboards
Document Cameras
Carts
Audio
Switchers/Interfaces
Home
Packages
Screens
Projectors
Audio
Switchers/Interfaces
Distribution Amplifiers
CCTV/Security
Carts
Interested in getting better pricing? [Tell me more]
Need assistance with A/V equipment installation? [Tell me more]
|
 | |
 | |
 | |
 | |
 |
| Proud Member of: |
 |
& |
Radio Design Labs RU-SH1 Pro Audio Line Mixer
|
|
Product Description
The RU-SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. The module mounts in RACK-UP series rack mounts or in various RDL mounting accessories. The RU-SH1 is a dual channel headphone amplifier with balanced/unbalanced left and right inputs. Each input accepts operating levels between -20 dBV and +20 dBu. Two recessed slide switches located on the top of the rear enclosure are set prior to mounting the module. One switch is provided for setting the input sensitivity. The mode switch selects between stereo and mono operation. In the mono position, the left input is used to drive both output channels. When the module is used in a monaural system, only the left channel input must be wired. The front panel level control is a long-life potentiometer controlling matched VCAs. Audio does not pass through this control, assuring years of noise-free level adjustment. The output amplifiers deliver more than 50 mW into either high or low impedance headphones through a durable, metal ¼” (6.3 mm) standard headphone jack. Module operation is from a 24 Vdc ground-referenced power supply. It can also operate from a 12 Vdc supply with a 6 dB reduction in headroom and a maximum output power of 10 mW.
The RU-SH1 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. The module mounts in RACK-UP series rack mounts or in various RDL mounting accessories. The RU-SH1 is a dual channel headphone amplifier with balanced/unbalanced left and right inputs. Each input accepts operating levels between -20 dBV and +20 dBu. Two recessed slide switches located on the top of the rear enclosure are set prior to mounting the module. One switch is provided for setting the input sensitivity. The mode switch selects between stereo and mono operation. In the mono position, the left input is used to drive both output channels. When the module is used in a monaural system, only the left channel input must be wired. The front panel level control is a long-life potentiometer controlling matched VCAs. Audio does not pass through this control, assuring years of noise-free level adjustment. The output amplifiers deliver more than 50 mW into either high or low impedance headphones through a durable, metal ¼” (6.3 mm) standard headphone jack. Module operation is from a 24 Vdc ground-referenced power supply. It can also operate from a 12 Vdc supply with a 6 dB reduction in headroom and a maximum output power of 10 mW.
|
Have A Question? Expert advice is only a phone call or email away. Call 1-866-866-6767 or use our online form to request more information from our knowledgeable staff on the Radio Design Labs RU-SH1 Pro Audio Line Mixer. Request Info |
|