AVsuperstore.com » Power Conditioners » Power Conditioners » Furman PowerPort

Furman PowerPort Remote AC Power Controller

One PowerPort controls one 20 amp circuit - an unlimited number of additional 20 amp circuits may be controlled by adding more PowerPorts
Turn-on or turn-off sequence is initiated by a simple switch closure - switches may be momentary or latching
Can use multiple remote on-off switches for multi-location control
PRO-Series level spike and surge clamping and EMI/RFI filtering provides the most comprehensive power protection available anywhere!
High reliability 25 amp relays
Incoming mains voltage is monitored for acceptable levels, with marginal voltages causing flashing alerts and extreme voltages causing protective shutdown
Manual mode allows delays to be overridden for troubleshooting
Screwdriver-adjustable turn-on and turn-off delay times, each independently settable from 0 to 60 seconds
Units may be wall-mounted or rack-mounted (half rack size) with appropriate mounting kits

Click here to add this product to the shopping cart

Furman PowerPort Product Description
PowerPorts comprise the building blocks of Furman's versatile new high performance power conditioning and distribution system, intended for medium size to the largest audio, video, and multimedia installations. Such a system can grow to any size, yet be conveniently controlled from any location. An individual PowerPort provides control, timing, monitoring, and power conditioning capability for a single equipment site. All critical circuit functions are governed by an internal microprocessor.

PowerPorts offer the same renowned RFI/EMI and spike/surge protection as Furman's top-of-the-line PRO Series rackmount power conditioners. A PowerPort can safely absorb up to a whopping 11,000 amperes of spike/surge current in any mode!Extreme Voltage Shutdown, fights a hazard particularly common in the entertainment industry: wiring faults. It senses voltages that are so high or low that operation would be impossible (under 80V or over 140V) and shuts the power down before damage can occur.

As a power sequencer, PowerPort has independent turn-on and turn-off delays, with simple daisy chaining for remote switching of single or an unlimited number of multiple units. Control wiring can be up to five miles in length without performance degradation, based on using 24 AWG. The PowerPort has two modes of operation: maintained and momentary. These terms refer to the type of switch that is attached to the remote terminals, and determine the functionality of the unit. The mode may be easily changed by moving a suitcase jumper on the circuit board.

Contact AVsuperstore for more information.

Have A Question?
Expert advice is only a phone call or email away. Call 1-866-866-6767 or use our online form to request more information from our knowledgeable staff on the Furman PowerPort Remote AC Power Controller. Request Info