 |
 |
|
| BusinessChurchConsumerSchoolGovernmentContractorPackagesInstallation |
|
Home
Packages
Screens
Projectors
Microphones
Assistive Listening
Audio
Amplifiers
Switchers/Interfaces
Home
Packages
Screens
Projectors
Flat Panel Displays
Cameras
Speakers
Amplifiers
Switchers/Interfaces
Home
Packages
Screens
Projectors
Electronic Whiteboards
Document Cameras
Carts
Audio
Switchers/Interfaces
Home
Packages
Screens
Projectors
Audio
Switchers/Interfaces
Distribution Amplifiers
CCTV/Security
Carts
Interested in getting better pricing? [Tell me more]
Need assistance with A/V equipment installation? [Tell me more]
|
 | |
 | |
 | |
|
Proud Member of:
Altinex DA1905GL 1-In 1-Out RGBHV Line Driver/Isolator
Includes: (1) power adapter |
|
Product Description
The DA1905GL is a multi-purpose RGBHV line driver, ground loop isolator, and sync processor. It offers a single input (5 BNC connectors for RGBHV) and a single output (6 BNC connectors for RGBSHV). It will also accept RGBS, RGsB, component video (Y, R-Y, B-Y), S-video, and composite video signals using the appropriate channels. With a single built-in equalization control, the DA1905GL can easily compensate for cable runs of 350 feet or more. All three R, G, and B channels are adjusted with the single control dial.
The DA1905GL also provides ground loop isolation to prevent hum bars and other artifacts caused by ground loops in a system. The common mode range of the DA1905GL is +/-.7V with a video signal of 1V p-p. (Most ground loops range between +/– 0.05 to 0.5 volts, which is well within the capabilities of the DA1905GL)
The DA1905GL also acts as a sync processor, allowing you to combine horizontal and vertical sync into composite sync or separating composite sync into horizontal and vertical sync. It can pass through a sync-on-Green signal, but does not, however, strip sync from a sync-on-Green signal.
The DA1905GL is a multi-purpose RGBHV line driver, ground loop isolator, and sync processor. It offers a single input (5 BNC connectors for RGBHV) and a single output (6 BNC connectors for RGBSHV). It will also accept RGBS, RGsB, component video (Y, R-Y, B-Y), S-video, and composite video signals using the appropriate channels. With a single built-in equalization control, the DA1905GL can easily compensate for cable runs of 350 feet or more. All three R, G, and B channels are adjusted with the single control dial.
The DA1905GL also provides ground loop isolation to prevent hum bars and other artifacts caused by ground loops in a system. The common mode range of the DA1905GL is +/-.7V with a video signal of 1V p-p. (Most ground loops range between +/– 0.05 to 0.5 volts, which is well within the capabilities of the DA1905GL)
The DA1905GL also acts as a sync processor, allowing you to combine horizontal and vertical sync into composite sync or separating composite sync into horizontal and vertical sync. It can pass through a sync-on-Green signal, but does not, however, strip sync from a sync-on-Green signal.
|
Have A Question? Expert advice is only a phone call or email away. Call 1-866-866-6767 or use our online form to request more information from our knowledgeable staff on the Altinex DA1905GL 1-In 1-Out RGBHV Line Driver/Isolator. Request Info |
|